Skip to content
30W PoE+ Adapter Powering UniFi PoE+ Devices Reducing PoE Switch Dependency Gigabit LAN
The Ubiquiti U-POE-AT-EU is a compact wall‑plug PoE injector delivering up to 30W of PoE+ power for UniFi PoE+ devices.
This adapter reduces dependency on PoE switch power while providing Gigabit LAN connection for combined data and power delivery.
48V DC 0.65A IEEE 802.3at PoE+ Gigabit Ethernet RJ45 Input AC Cable Earth Ground Protection
Delivers 48V DC @ 0.65A (30W) through IEEE 802.3at (PoE+) compliant standard with Gigabit Ethernet speeds up to 1000 Mbit/s.
Includes RJ45 data input port, AC cable with earth ground (100‑240V AC, 50/60Hz), plus surge/peak pulse/overcurrent protection.
U6 Access Points Cameras VoIP Phones Plug-and-Play LED Status Universal Mains Compact Certified
Compatible with U6-LR, U6-IW, U6-Lite, U6-Pro, U6-Enterprise access points, UVC-AI-Pro/UTP-TouchMax cameras, and VoIP phones.
Features plug-and-play installation, LED status indicator, universal mains input (100‑240V), compact 93×62×35mm design, white color, CE/FCC/IC/UL certified.
30W PoE+ Adapter Powering UniFi PoE+ Devices Reducing PoE Switch Dependency Gigabit LAN
The Ubiquiti U-POE-AT-EU is a compact wall‑plug PoE injector delivering up to 30W of PoE+ power for UniFi PoE+ devices.
This adapter reduces dependency on PoE switch power while providing Gigabit LAN connection for combined data and power delivery.
Power and performance.
The U-POE-AT-EU provides full 802.3at PoE+ output so higher-power devices (up to the standard PoE+ wattage) receive stable current for uninterrupted operation.
It maintains consistent voltage under load and is suitable for continuous 24/7 deployments.
This ensures connected cameras and APs run reliably without brownouts or resets.
Build quality and protections.
The adapter’s casing and internal components are designed for frequent use, featuring thermal management and protective circuitry to prevent damage from overloads, shorts, or overheating.
These protections help extend the life of both the adapter and downstream devices.
Maintenance is minimal — installation and replacement are straightforward when needed.
Installation and use cases.
Installation is plug-and-play: insert into an EU wall socket, connect the Ethernet/PoE output to your device, and the adapter negotiates power automatically.
Typical use cases include powering ceiling or wall-mounted Wi‑Fi access points, outdoor-rated IP cameras (via indoor power point), and PoE-enabled controllers in environments where running AC to the device is impractical.
Short features
Output: 802.3at (PoE+) compliant, up to standard PoE+ wattage.
Input: EU AC plug (mains), compact wall-mount style.
Protections: overload, short circuit, over-temperature.
Connector: single Ethernet RJ45 PoE output.
Installation: plug-and-play, auto-detection of PoE devices.
Compatibility: works with standard PoE/PoE+ devices (APs, cameras, VoIP).
Form factor: low-profile; minimal cable clutter.
Use: indoor only.
FAQs
The U-POE-AT-EU powers standard 802.3af/at PoE devices such as access points, IP cameras, and VoIP phones, providing PoE+ levels where required.
No — it’s plug-and-play and automatically negotiates PoE with connected devices, so no setup or management interface is needed.
The adapter is designed for indoor wall-socket use; it is not weatherproof and should not be installed outdoors without appropriate weatherproof enclosures.
It includes built-in protections against overload, short circuits, and overheating to prevent damage to both the adapter and downstream devices.
Yes — it follows the 802.3af/at standards, so it is compatible with other vendors’ PoE and PoE+ devices that adhere to those specifications.
Reviews
There are no reviews yet.